RE 50HI is the hi-input amplifier
accomplished by its original unique characteristics. This amplifier can get the musical signal from the power amplifier in head
units directly without any changing of musical signal.Then RE 50HI drives
speakers by the function of constant current driving. Consequently RE 50HI can easily get superb
quality of sound that S.E.P.P. amplifiers can not attain.
This is the key to select the amplifier in up-grading of car original audio
system.
Original technology
The high power amplifier built in the genuine head unit is outputted by BTL connection. RE 50HI uses skillfully the advantage
of the input transformer with which the speaker output and RE series are
equipped.
RE 50HI connects between amplifier direct from a head unit with the high
voltage (balance), and does not cause degradation of sound quality.
Installation and operation are very easy.
The speaker output of a head unit is only inputted into amplifier.
ON/OFF of an amplifier power supply have equipped both of Remote in as
ACC.
RE 50HI Signal line
It is balance transmission which can prevent a disturbance noise from a
head unit to an input transformer.
Since it inputs by the high voltage, sound quality degradation can be prevented.
RE 50HI Specifications
Out power
50W*2 / 1KHz 10 ohms
RE 50HI Stereo Amplifier
Input sensitivity
5.5V RMS
Input impedance
600 ohms
Load Impedance
4 ohms
Idling Current
On, No signal 3A
Remote Off 2mA
Dimensions
W330 * D280 * H74mm
(Without terminals)
*This amplifier has equipped the Remote in terminal and the ACC in terminal.
*In the case of a head unit without a remote output, attachment of ON/off-switch
is recommended.
(It can be used even when not installing ON/off-switch)
*The input from the apparatus which is not BTL connection is also possible.
